Working principle and product details

01 Product main image

The ignition electrode (ceramic ignition needle) is mainly assembled from high temperature resistant alumina ceramics and resistant high temperature alloys, high temperature and high voltage wires, terminals, etc. It has the advantages of sensitive and reliable ignition, high temperature and oxidation resistance, and is widely used in liquefaction Intermittent ignition of LPG gas appliances (stove, water heater, barbecue stove, burner, gas lamp, heating stove, etc.)

02 Ceramic part

Length:38.0mm Diameter:5.4mm-6.5mm

The 95% alumina is made of hot pressure casting slurry and sintered at a high temperature of 1500℃. It has the following advantages:

1. High mechanical strength and wear resistance;

2. Strong chemical resistance to acid and alkali.

3. Good electrical insulation performance at room temperature and high temperature.

03 Electrode part

Material:Ocr25Al5 or Cr20Ni80 ; Length:4.8mm

Iron-chromium-aluminum resistance electric heating alloy has the characteristics of high resistivity, low temperature coefficient of resistance and high operating temperature.

Resistance electric heating alloy, this kind of alloy has stable structure, stable electrical and physical properties, good high temperature mechanical properties, good cold deformation plasticity, good weldability, and will not produce brittle fracture after long-term use. It is mostly used in the manufacture of household appliances and heating elements whose working temperature is below 1600℃, with long service life

04 Wire part

The material:Tin alloy with Teflon protection cover

1. It has excellent electrical insulation performance, high voltage resistance, low high frequency loss, no moisture absorption, and large insulation resistance;

2. It has excellent corrosion resistance, almost insoluble in any organic solvents, and can resist oil, strong acid, strong alkali, strong oxidant, etc.;

3. It has excellent flame resistance, aging resistance and long service life;

05 Terminals and connection parts

If you have other requirements for size and material, we can remake the mold. The size of the ceramic part, the length of the wire and the material,the material and size of electrode part can all be customized according to your drawings.

Production process

1.Raw material mixing	2.Hot press injection molding
3.High temperature firing	4.Thermoforming
5.Glazing	6.Electrical measurement

Company Product Catalog

Yangzhou Lisheng Ceramics Co., Ltd. invested 3.5 million yuan in November 2015 to rent a 2358 m2 workshop located in Shuangbao Road, Liubao Industrial Concentration Zone, Baoying County, Baoying County Liubao Industrial Zone Development Co., Ltd., and purchased a slow mixer , Hot press forming machine, environmentally friendly gas pusher furnace, high temperature pusher electric furnace and other advanced equipment, with an annual output of 6 million electronic ceramics and ceramic accessories.

FAQ:

1.Are you a manufacturer or a trader？

We are a manufacturer with our own factory located in Jiangsu.

2.What is the main product of your company?

We are a company specializing in ignition electrodes and spark plugs. Our products are widely used in gas appliances.

3.Whether to provide sample service？

Yes

http://www.cnignitionelectrode.com/